Memmert Products
Find the right Memmert product for your application in a matter of seconds!
Environmental test chambers CTC / TTC
Memmert environmental test chambers guarantee the perfect atmosphere for climate and temperature tests
Environmental test chambers CTC / TTC
The environment test duo for temperature test and climate test simulates the perfect atmosphere according to standards and reduces the time needed for certain processes through rapid temperature changes.
Rapid and energy-saving temperature changes in the environmental chamber
Temperature test chamber TTC and climatic test chamber CTC
Rapid, precise and energy-saving temperature changes in the range from -42 ºC to +190 ºC, along with fast humidity recovery times, make the TTC temperature test chamber and the CTC climatic test chamber with humidity unit a perfect duo for controlled material testing, function tests, ageing tests or climate tests on composites, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics.
- 1 model size (256 litres volume)
- long-standing proven control technology
- electronically controlled active humidification and dehumidification from 10 % to 98 % rh
- specifically suited for tests in accordance with IEC 60068
- high-tech insulation system for permanent insulation capacity and energy efficiency
- temperature change rate in heating operation according to IEC 60068-3-5: 10 K/min (-40 °C to +180 °C; measured at an ambient temperature of 22 °C)
- temperature change rate in cooling operation according to IEC 60068-3-5: 3 K/min (from +180 °C to -40 °C; measured at an ambient temperature of 22 °C)
- refrigerant R449A
Universal oven dishwasher UF750DW
Custom built dishwasher with air circulation
Universal oven dishwasher UF750DW
Custom built dishwasher with air circulation
Universal oven dishwasher UF750DW
This is a special, customized device made by Memmert’s <f:link.page pageUid="55">m360</f:link.page>. This device uses air circulation process to help with dishwasher usability tests. This tailor made device has several advantages. For example, it prevents temperature overshoots as its temperature control and heating power have been adapted to the test parameters stipulated in EN50242/EN60436.
- Working temperature range up to +100°C
- 1 model size (749 litres volume)
- TwinDISPLAY model with settings for language, timer, SetpointWAIT, calibration and adjustable parameters
- Forced air circulation F
Cooled vacuum oven VOcool
For gentle drying of bacteria and starter cultures or simulation of intercontinental flights.
Cooled vacuum oven VOcool
For gentle drying of bacteria and starter cultures or simulation of intercontinental flights.
Cooled vacuum oven VOcool
Low-temperature vacuum drying enables pharmaceutical or food labs to gently dry bacteria and starter cultures in the cooled vacuum oven VOcool. Furthermore, programme-controlled storage and transport scenarios, for determining the behaviour of active ingredients or volumes at different pressure and temperature conditions, can be simulated.
- Temperature range +5 up to +90 ℃
- 2 model sizes (29 and 49 litres volume)
- 1 model variant: TwinDISPLAY
Peltier-cooled incubator IPPeco / IPPecoplus
Sets eco standards for cultivation below room temperature: unmatched energy efficiency, best values for heat-up, cool-down and recovery times.
Peltier-cooled incubator IPPeco
Powerful and energy-saving at the same time
Cooled Incubator IPPeco with Advanced Peltier Technology
Powered by the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and, simultaneously, the most powerful cooled incubator of its kind.
Compared to similar appliances, its heat-up, cool down and recovery times are much shorter. The Peltier-cooled incubator from Memmert saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.
Common applications are microbiological analyses, bacterial count determination, cultivation above & below room temperature, beer stability accelerated aging test, or shelf life tests of dairy products.
- Temperature range 0°C up to +70 °C
- 9 model sizes (32 to 2140 litres volume)
- 2 model variants: SingleDISPLAY and TwinDISPLAY
- Double doors as standard with fully insulated stainless steel. Inside glass: prevention of contamination and drops or rises in temperature. Furthermore, an optimal view of the sensitive load through wide-area Interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves) are possible.
- Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distribution
Constant climate chamber HPPeco
Maximum energy efficiency in continuous operation - tailor-made for stability studies according to ICH guidelines, stability tests for cosmetics and foods as well as environmental testing and material testing
Constant climate chamber HPPeco
A new dimension of energy efficiency and precision
Constant climate chamber | Advanced Peltier Technology
This powerful climate chamber with <f:link.page pageUid="148">Advanced Peltier Technology</f:link.page> has more than earned the 'eco’ epithet. In continuous operation, it works around 90% more energy efficiently than compressor-cooled devices, does not require any refrigerant and is therefore nearly maintenance-free.
The temperature control from +0 °C to +70 °C as well as the active humidification and dehumidification from 10% to 90% rh in the HPPeco are optimally tailored to the requirements of stability tests in pharmaceutical industry (Q1A).
Due to its quiet operation the compact constant climate chamber is also suitable for breeding insects or zebra fish.
- Temperature range from +0 °C up to +70 °C
- 7 model sizes (108 to 2140 litres volume)
- 1 model variant: TwinDISPLAY
- Digitally controlled active humidification and dehumidification up to 90% rh
- double doors as standard with fully insulated stainless steel. Inside glass: prevention of contamination and drops or rises in temperature.
- An optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves) are possible.
Water bath WTB
Ideal for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segment
Water bath WTB
A laboratory water bath with the highest degree of comfort
Water bath WTB
The Memmert water bath for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segmentis available in six model sizes. The operating conceptof the wather bath WTB impresses with its intuitive and convenient menu navigation. A special highlight: with the customizable, remote view CustomView, you can always keep an eye on the important information.
- temperature range up to +100 °C
- 6 model sizes (7 to 51 litres volume)
- extensive range of accessories: e.g. flat or gable cover, shaking device, circulation pump
- state-of-the-art control technology
- high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
CO2 incubator ICO
Safety at all times: High-end functions for the protection of cell cultures, bacteria cultures or tissue cultures.
CO2 Incubator ICO
Safety at all times.
For the protection of cell cultures, bacteria cultures or tissue cultures
CO2 Incubator ICO
The control system of the Memmert CO2 incubator ICO is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots.
Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered <f:link.page pageUid="https://www.memmert.com/why-memmert/5-good-reasons/#intuitive-operation">ControlCOCKPIT</f:link.page> ensures continuous CO2 control even when there is a power failure.
Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning, the interior can be sterilised within 60 minutes at 180 °C.
- 4 model sizes (with a chamber volume of 56 to 241 litres)
- Temperature range +18 °C to +50 °C
- Setting range CO2 0 to 20 % CO2
- Setting range 02 1 to 20 % O2
- Setting range active humidity control (with option K7) 40 to 97 and rh-off
- Fail-safe, FDA-compliant logging of temperature, CO2, O2 humidity, open door time data
- Battery-buffered ControlCOCKPIT: The operating display, logging and CO2 control are fully functional even during a power failure
- Visual and acoustic alarm as well as alarm notification to mobile phones if the individually adjustable temperature, CO2, O2, or humidity ranges are exceeded
- Active humidity control
- The interior chamber, including all installations and sensors, can be sterilised at +180 °C in a 60-minute programme
Climate chamber ICH / ICHL
Unparalleled homogeneity of temperature and humidity. For stability testing according to ICH - WHO - EMA - ASEAN - GMP - GLP – GCCP.
Climate Chamber ICH
Climate chamber for stability testing in accordance with ICH - WHO - EMA - ASEAN - GMP - GLP - GCCP.
Climate chamber ICH for stability testing in accordance with ICH and GMP
Its excellent temperature and humidity homogeneity positions the climate chamber ICH in the international top league of stability test chambers. Thermal transfer to the interior – whether heat or cold – is guaranteed through a large-area air jacket on four sides. Thanks to its hermetically sealed interior, the climate chamber ICH does not consume any water once the setpoints have been reached, provided that the door is not opened. Two high-grade platinum temperature sensors with mutual monitoring guarantee interruption-free long-term operation even if one sensor should fail.
- Digitally controlled active humidification and dehumidification from 10 to 80 % rh
- Temperature range from - 10 °C to + 60 °C (models ICH), 0 °C to + 60 °C (modelsICHL)
- 1 model variant - TwinDISPLAY
- double doors as standard: Prevention of contamination and drops or prevention of rises in temperature with an optimal view of the chamber load through wide-area interior glass doors
Humidity chamber HCP
Active humidity control creates a controlled environment for accelerated life tests and 85/85 tests.
Humidity chamber HCP
Perfect environmental simulation in the humidity chamber
Climate chamber with active humidity control
This climate chamber offers the full range of comfort, reliability, and safety. It has active humidity control set from 20 % to 95 % rh and an unsurpassed homogeneity of temperature and humidity over the entire interior.
It is suited for environmental testing, environmental simulation, accelerated service life tests, and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.
- Temperature range up to +90 °C
- 4 model sizes (56 to 241 litres volume)
- 1 model variant: TwinDISPLAY
- Active humidity control 20 to 95 % rh
- Double doors as standard:
- 1. Prevention of contamination
- 2. Prevention of drops or rises in temperature
- 3. An optimal view of the sensitive chamber load through wide-area heated inner glass door
IVF module for ICOmed IVF module
Ideally suited for in vitro fertilisation. Controlled CO2 and O2 concentration as well as gentle cultivation in Petri dishes in separate slide-in units.
IVF module for ICOmed
Ideally suited for in vitro fertilisation. Controlled CO2 and O2 concentration as well as gentle cultivation in Petri dishes in separate slide-in units.
In vitro fertilisation: IVF module for CO2 incubator ICOmed
When it comes to successful in vitro fertilisation, precision and reliability of CO2 incubators are of utmost importance. Even minimal discrepancies in CO2 and O2 concentration, temperature or humidity can influence the development of the cell culture. To keep the recovery times of the ICO105med incubator to a minimum, Memmert has developed an IVF module with separate slide-in units for the Petri dishes. The Memmert CO2 incubator ICOmed is classified as a class IIa medical device. Memmert is bringing medical devices of class IIa into circulation according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).
- temperature range up to +50 °C
- 2 model sizes (56 & 107 litres volume)
- cultivating of Petri dishes in separate slide-in units: quick recovery times due to minimum air exchange
- active humidity control: minimum vaporisation in the chamber interior, no condensation, no cultivation with oil required
- the interior including all installations and sensors can be sterilised at 180 °C in a 1-hour programme
Blanket warmer IFbw
The Memmert blanket warmer IFbw is a Class I medical device.
Blanket Warmer IFbw
Immediately ready-to-hand and precisely preheated blankets
Blanket Warmer IFbw
Blanket warmers are vital when attending to seriously injured patients, especially in emergency rooms, as well as in delivery rooms or recovery rooms, where they are useful on a daily basis. In a blanket warmer IFbw, blankets and cloths are preheated to a precise temperature. It is essential for keeping patients warm. This minimises the risk of complications such as wound infections, cardiovascular disorders, cardiac arrhythmia or vascular disorders.
- Temperature range up to +80 °C
- 4 model sizes (with a chamber volume of 108 to 749 litres)
- Forced air circulation F, fixed at 100%
Universal oven Um UNm / UFm / UNmplus /UFmplus
The heating oven Um is a Class I medical device.
Universal Oven Um
The heating oven Um is a Class I medical device.
Intended use for heating and keeping warm as a medical device
Universal heating oven Um
Memmert heating ovens Um or Umplus may be used for heating fango, silicate and APS packs for physical therapy and keeping them warm. Memmert is bringing medical devices of class I according to the regulation MDR (EU) 2017/745 into circulation.
Incubator Im INm / IFm / INmplus / IFmplus
The incubator Im is a Class I medical device.
Incubator Im
The incubator Im is a Class I medical device.
Temper rinsing and infusion solutions and contrast media
Incubator Im as a medical device
Incubators Im and Implus may be used for temperature control of rinsing, infusion solutions, and contrast agents. With the fine-tuned control technology, critical temperature overshoots are completely ruled out. Rinsing and infusion solutions are therefore heated precisely and particularly gently in this high-precision incubator. Memmert in cubator Im is bringing medical devices of class I according to the regulation MDR (EU) 2017/745 into circulation.
CO2 incubator ICOmed ICOmed
Safety at all times: High-end functions for the protection of cell cultures, bacteria cultures or tissue cultures.
CO2 Incubator ICOmed
Safety at all times.
Protection of cell cultures, bacteria cultures or tissue cultures
CO2 Incubator ICOmed
The control system of the Memmert CO2 incubator ICOmed is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots.
Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered <f:link.page pageUid="https://www.memmert.com/why-memmert/5-good-reasons/#intuitive-operation">ControlCOCKPIT</f:link.page> ensures continuous CO2 control even when there is a power failure.
Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning, the interior can be sterilised within 60 minutes at 180 °C.
- 4 model sizes (with a chamber volume of 56 to 241 litres)
- Temperature range +18 °C to +50 °C
- Setting range CO2 0 to 20 % CO2
- Setting range 02 1 to 20 % O2
- Setting range active humidity control (with option K7) 40 to 97 and rh-off
- Fail-safe, FDA-compliant logging of temperature, CO2, O2 humidity, open door time data
- Battery-buffered ControlCOCKPIT: The operating display, logging and CO2 control are fully functional even during a power failure
- Visual and acoustic alarm as well as alarm notification to mobile phones if the individually adjustable temperature, CO2, O2, or humidity ranges are exceeded
- Active humidity control
- The interior chamber, including all installations and sensors, can be sterilised at +180 °C in a 60-minute programme
Universal oven UN / UF / UNplus / UFplus
Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance.
Universal Oven U
Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance.
Lab oven for universal use
Universal heating oven and drying oven
Whatever you want to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine. The Memmert U universal heating oven / drying oven stands for unparalleled precise, even and gentle temperature control.
- Temperature range up to +300 °C
- 9 model sizes (32 to 1060 litres volume)
- 2 model variants: SingleDISPLAY and TwinDISPLAY
- Natural convection or forced air circulation N/F
Steriliser SN / SF / SNplus / SFplus
Sterilisation instead of disinfection of instruments in the laboratory. The steriliser complies with all relevant standards and regulations for medical devices.
Steriliser S
Sterilisation done without requiring disinfection of laboratory instruments and equipment. A hot air sterilisation device protects and saves lives in medicine.
To ensure laboratory equipment and devices are sterilized
Hot air Steriliser S
What is hot air sterilisation? Steriliser S makes use of dry sterilisation to ensure laboratory equipment and devices are sterilized. With this method, hot air, devoid of water vapor or moisture, makes sure the device is sterile without needing risk prone disinfection methods.
Each Memmert hot air steriliser S is classified as class IIb medical device. Memmert is bringing medical devices of class IIb into circulation according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).
- Hot air sterilisation temperature range up to +250 °C
- 8 model sizes (32 to 749 liters volume) to heat sterilize as needed
- 2 model variants: SingleDISPLAY and TwinDISPLAY
- Natural convection or forced air circulation N/F
Pass-through oven UF TS
The Memmert pass-through oven saves time when loading and reduces the danger of contamination, especially when directly transporting the chamber load between the grey room and the clean room.
Pass-through oven UF TS
Perfect material lock between the greyroom and the cleanroom in the electronics and semiconductor, medicine or pharmaceutical industry.
Temperature controlled material lock for the cleanroom laboratory
Pass-through oven UF TS
If you want to minimise contamination when transporting samples or components, the advantages of the UF TS are just what you need. Thanks to its easy-to-clean interior, fast recovery times after opening the door as well as homogeneous temperature distribution, this oven is the perfect material lock between the grey room and the cleanroom in the electronics and semiconductor, medicine or pharmaceutics industry.
The pass-through oven UF TS is based on the Memmert <f:link.page pageUid="https://www.memmert.com/products/heating-drying-ovens/universal-oven/#!filters=%7B%7D">standard heating oven UFplus</f:link.page> and it features all required technological highlights like product specific heating and perfectly adapted control technology. The top configuration with <f:link.page pageUid="144">TwinDISPLAY</f:link.page> ensures precision and <f:link.page pageUid="https://www.memmert.com/why-memmert/5-good-reasons/#safety">thermal safety</f:link.page>, especially when working in the cleanroom. However, as these units have to be adapted to meet users' specific demands, please get in contact with our experts for individual solutions us. We will find the optimum solution for your application.
- temperature range up to +250 °C
- 4 model sizes (161 to 749 litres volume)
- 1 model variant: TwinDISPLAY
- forced air circulation F
Paraffin oven UNpa
For many years, and with great precision, our paraffin oven UNpa has served users in science and research in sample preparation.
Paraffin oven UNpa
For many years, and with great precision, our paraffin oven UNpa has served users in science and research in sample preparation.
Reliable sample preparation in histology
Paraffin oven UNpa
Five model sizes, for high-precision temperature control of the embedding medium, such as paraffin or wax. The range of functions and thermal safety of the Memmert paraffin oven UNpa are designed specifically for an absolutely reliable sample preparation in histology, forensics or microbiology. Your benefits? An optimum cost/benefit ratio for an appliance that guarantees, for many years, precise and even warming of the embedding medium without any loss in quality whatsoever.
- 5 model sizes (32 to 161 litres volume)
- Temperature range +30 °C to +80 °C
- Model variant: TwinDISPLAY
- High degree of thermal safety through multiple overtemperature protection
- No feed or exhaust air, therefore an almost gas-tight chamber
Vacuum oven VO
Digital pressure control ensures rapid and gentle vacuum drying. Its speed-controlled vacuum pump (accessory) saves around 70% energy.
Vacuum oven VO
Gentle, powerful, energy-saving
Vacuum drying oven VO
Reliable, comfortable and energy-efficient - that’s how vacuum drying works today. Separately adjustable and directly heated thermoshelves ensure precise temperature control and, thanks to the digital pressure control, the chamber load is not only dried at high speed but also extremely gently in our powerful and robust vacuum drying oven. Together with the speed-controlled vacuum pump, the vacuum oven VO forms an unbeatably energy-efficient duo. The pump is perfectly tidied away in the matching base cabinet.
- Temperature range up to +200 °C
- Vacuum control range: 5 to 1100 mbar
- 3 model sizes (29 to 101 litres volume)
- 1 model variant: TwinDISPLAY
- Anti-splinter; VDE-tested door construction for all models
- Pump control: Optimised rinsing of the pump membrane as well as signal output for switching the pump ON/OFF according to requirements.
- Optional: Pump base cabinet and energy-efficient vacuum pump
Water bath WNB / WNE / WPE
The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratory.
Water bath WNB / WNE / WPE
The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratory.
A laboratory water bath with high safety standards
It comes in six model sizes and two performance classes. In the Basic class, users benefit from standard temperature control tasks. In the Excellent class, there is full use of precise test procedures with maximum safety. There is electronic overtemperature control and visual & acoustic signals for input recognition and end of program, for example. To enhance the thermal uniformity of water, the largest model comes with an optional circulation pump.
- temperature range up to +95 °C (with Peltier cooling unit CDP115 from +10 °C)
- 6 model sizes (7 to 45 litres volume)
- extensive range of accessories: e.g. a Peltier cooling unit, flat or gable cover, shaking device, floor shelf, test tube rack
- state-of-the-art control technology
- optional water level control
- high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
Constant climate chamber HPP
Our constant climate chamber is tailored to environmental simulation, material testing and stability testing in accordance with the ICH guidelines.
Constant climate chamber HPP
Our constant climate chamber is tailored to environmental simulation, material testing and stability testing in accordance with the ICH guidelines.
High-precision stability testing
Are you looking for a stability chamber for environmental simulation, material testing and stability testing which is quiet, space-saving, environmentally friendly and at the same time extremely economical? Then choose the innovative <f:link.page pageUid="148">Peltier technology</f:link.page> in the HPP constant climate chamber for stable and precise long-term tests. The temperature control from +0 ºC to +70 ºC, as well as the active humidification and dehumidification from 10% to 90% rh, are optimally tuned to the requirements of stability analysis.
- Temperature range up to +70 °C
- 7 model sizes (108 to 2140 litres volume)
- 1 model variant: TwinDISPLAY
- digitally controlled active humidification and dehumidification up to 90%
- double doors as standard: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 2200 three leaves)
Cleanroom constant climate chamber HPP1060
Fraunhofer TESTED DEVICE in the standard version. The cleanroom-compliant constant climate chamber is ideal for environmental simulation, climate testing and stability testing.
Cleanroom constant climate chamber HPP1060
Fraunhofer TESTED DEVICE in the standard version. The cleanroom-compliant constant climate chamber for environmental simulation, climate testing and stability testing.
Constant climate chamber certified for use in the cleanroom
The suitability of the Memmert constant climate chamber HPP1060 for use in the cleanroom has been confirmed by the independent Fraunhofer IPA (Institute for Manufacturing Engineering and Automation). It is therefore entitled to bear the certificate Fraunhofer TESTED DEVICE®. In order to guarantee the maximum quality assurance, the drying oven was tested in accordance with a uniform and statistically secured standard. The tested appliance was given the certificate in its standard version without any modifications such as particulate filters. The HPP1060 attains cleanroom class 5 in accordance with DIN EN ISO 14644-14.
- Temperature range up to +70 °C
- 1 model size (1060 litres volume)
- 1 model variant: TwinDISPLAY
- digitally controlled active humidification and dehumidification up to 90%
- double doors as standard: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors
Compressor-cooled incubator ICP
Ideal for ramp operation with rapid temperature changes during incubation, breeding or storage.
Compressor-cooled incubator ICP
Do you require different ramps for incubating, breeding or storing? Do you need a larger chamber volume and at the same time quick temperature changes?
Incubate, dry and store
Compressor cooled incubator ICP
Our ICP compressor-cooled incubator offers great results whenever a rapid and precise changeover between heating and cooling phases in ramp operation is required. Due to the finely tuned control technology, temperatures exactly reach the setpoint values without the need for energy-intensive bursts of power.
- temperature range -12 °C up to +60 °C
- 4 model sizes (108 to 749 litres volume)
- 1 model variant: TwinDISPLAY
- double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
- very good air circulation in the working chamber through sophisticated ventilation technology
- intelligent defrosting function
The Memmert cooled incubator ICP offers unique advantages
- intuitive and easy-to-use operating menu
- temperature ramps programmable via AtmoControl software (models with TwinDISPLAY)
- almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
- heating concept specifically adapted for a precise and homogenous temperature control
- a wide range of options for programming and documentation using interfaces, integrated data logger and Software AtmoCONTROL
- 3 years guarantee worldwide
Peltier-cooled incubator IPP / IPPplus
Microbiology, zoology, food, cosmetics or pharma industry: the energy-saving cooled incubator with Peltier elements heats up and cools down seamlessly in one system.
Peltier-cooled incubator IPP
Microbiology, zoology, food, cosmetics or pharma industry: the energy-saving cooled incubator with Peltier elements heats up and cools down seamlessly in one system.
Almost noiseless and vibration-free: Peltier-cooled incubator IPP
Excellent controllability, extremely small control fluctuations, low-vibration operation and impressive energy savings provide the added value from this perfect adaptation of Peltier technology. With its extensive range of appliances with <f:link.page pageUid="https://www.memmert.com/why-memmert/innovation-leader/all-round-surface-heating/">Peltier elements</f:link.page> for heating and cooling – such as the <f:link.page pageUid="https://www.memmert.com/products/incubators/peltier-cooled-incubator/#!filters=%7B%7D">IPP Peltier-cooled incubator</f:link.page>, the <f:link.page pageUid="https://www.memmert.com/de/produkte/klimaschraenke/konstantklima-kammer/#!filters=%7B%7D">HPP constant climate chamber</f:link.page>, the <f:link.page pageUid="https://www.memmert.com/de/produkte/inkubatoren/lager-kuehlbrutschrank/#!filters=%7B%7D">IPS cooled storage incubator</f:link.page> and the <f:link.page pageUid="146">Peltier-cooling</f:link.page> unit for <f:link.page pageUid="https://www.memmert.com/products/water-and-oilbaths/waterbath/#!filters=%7B%7D">water baths</f:link.page> – Memmert is the market leader in this technologically sophisticated segment.
- temperature range 0°C up to +70 °C
- 7 model sizes (32 to 1060 litres volume)
- 2 model variants: SingleDISPLAY and TwinDISPLAY
- double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
- fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distribution
Incubator IN / IF / INplus / IFplus
The incubator I is perfect for the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.
Incubator I
The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.
Highly sensitive, extremely accurate
Incubator I
In the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned <f:link.page pageUid="https://www.memmert.com/why-memmert/innovation-leader/">control technology</f:link.page>, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.
- temperature range up to +80 °C
- 8 model sizes (32 to 749 litres volume)
- 2 model variants: SingleDISPLAY and TwinDISPLAY
- natural convection or forced air circulation N/F
- double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
- activation of sterilisation routine via ControlCOCKPIT (TwinDISPLAY)